Administrator Guide

Version Description
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series and C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information
If trac is shaped between 64 and 1000 Kbs, for some values, the shaped rate is much less than the value
congured.
On 40-port 10G stack-unit if the trac is shaped between 64 and 1000 Kbs, for some values, the shaped rate is
much less than the value congured.
NOTE: When packets of size greater than 7000 bytes are expected to be received from the network,
Dell Networking recommends that you congure the burst value to be more than 175 KB if you
congured the rate shape. Such a setting ensures proper bandwidth sharing across queues.
Related Commands
• rate-shape — shapes trac output as part of the designated policy.
service-class dot1p-mapping
Congure a service-class criterion based on a dot1p value.
S3048–ON
Syntax
service-class dot1p-mapping {dot1p0 queue | dot1p1 queue | dot1p2 queue |
dot1p3 queue | dot1p4 queue| dot1p5 queue | dot1p6 queue | dot1p7 queue}
Parameters
queue Enter a value from 0 to 7.
Defaults For each dot1p Priority, the default CoS queue value is:
• Dot1p Priority : 0 1 2 3 4 5 6 7
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Quality of Service (QoS) 1253