Manualshelf

Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON
1261126212631264126512661267126812691270
Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced.
Usage Information To access this command, enter the class-map command. You can match against only one VLAN ID.
Related Commands
• class-map — identies the class map.
policy-aggregate
Allow an aggregate method of conguring per-port QoS via policy maps. An aggregate QoS policy is part of the policy map (output) applied
on an interface.
S3048–ON
Syntax
policy-aggregate qos-policy-name
To remove a policy aggregate conguration, use the no policy-aggregate qos-policy-name command.
Parameters
qos-policy-name Enter the name of the policy map in character format (32 characters maximum).
Defaults none
Command Modes CONFIGURATION (policy-map-input and policy-map-output)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the S-Series.
1268 Quality of Service (QoS)