Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1351

Parameters

max-age Enter a number of seconds the Dell Networking OS waits before refreshing conguration

information. The range is from 6 to 40 seconds. The default is 20 seconds.

Defaults 20 seconds

Command Modes CONFIGURATION RSTP (conf-rstp)

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

Related Commands

• forward-delay — changes the wait time before RSTP transitions to the Forwarding state.

• hello-time — changes the time interval between BPDUs.

protocol spanning-tree rstp

To congure RSTP, enter RSTP mode.

Syntax

protocol spanning-tree rstp

To exit RSTP mode, use the exit command.

Defaults Not congured

Command Modes CONFIGURATION