Administrator Guide

Parameters
sha256-password Enter the keyword sha256-password then the encryption-type or the password.
level level (OPTIONAL) Enter the keyword level then a number as the level of access. The range
is from 1 to 15.
encryption-type
(OPTIONAL) Enter the number 8 or 0 as the encryption type.
Enter 8 to enter the sha256–based hashed password.
password Enter a text string, up to 32 characters long, as the clear text password.
Defaults No password is congured. level = 15.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON, S6000, S6000–ON, S5000, S4810, S4820T, S3048–ON,
S4048–ON, MXL, FN IOM, C9010, S3100, and Z9100-ON.
Related Commands
• show running-cong — views the current conguration.
• privilege level (CONFIGURATION mode) — controls access to the command modes within the switch.
enable restricted
Allows Dell Networking technical support to access restricted commands.
Syntax
enable restricted [encryption-type] password
To disallow access to restricted commands, use the no enable restricted command.
Parameters
encryption-type
(OPTIONAL) Enter the number 7 as the encryption type.
Enter 7 followed a text string as the hidden password. The text string must be a
password that was already encrypted by a Dell Networking router.
Use this parameter only with a password that you copied from the show running-
config le of another Dell Networking router.
password Enter a text string, up to 32 characters long, as the clear text password.
Defaults Not congured.
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
Security 1381