Administrator Guide

When FIPS mode is enabled:
• hmac-sha2–256
• hmac-sha1
• hmac-sha1–96
When FIPS mode is disabled:
• hmac-sha2-256
• hmac-sha1
• hmac-sha1–96
• hmac-md5
• hmac-md5-96
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON, S6000, S6000–ON, S5000, S4810, S4820T, S3048–ON,
S4048–ON, MXL, C9010, S3100 series, and Z9100-ON.
Usage Information
• You can select one or more MAC algorithms from the list.
• Client-supported MAC list gets preference over the server-supported MAC list in selecting the MAC algorithm
for the SSH session.
• When the MAC (-m) option is used with the SSH CLI, it overrides the congured or default MAC list.
• When FIPS is enabled or disabled, the client MACs get default conguration.
ip ssh password-authentication
Enable password authentication for the SSH server.
Syntax
ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-authentication enable command.
Parameters
enable Enter the keyword enable to enable password-authentication for the SSH server.
Defaults Enabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
1432 Security