Administrator Guide

NOTE: If you are authorized for the EXEC Privilege mode by your role, you do not need to enter an
enable password.
Related Commands
• enable password — congures a password for the enable command and to access a privilege level.
role
Changes command permissions for roles.
Syntax role mode { { { addrole | deleterole } role-name } | reset } command
To delete access to a command, use the no role mode role-name
Parameters
mode
Enter one of the following keywords as the mode for which you are controlling access:
congure for CONFIGURATION mode
exec for EXEC mode
interface for INTERFACE modes
line for LINE mode
route-map for Route-map mode
router for Router mode
addrole Enter the keyword addrole to add permission to the command. You cannot add or
delete rights for the sysadmin role.
deleterole
Enter the keyword deleterole to remove access to the command. You cannot add or
delete rights for the sysadmin role.
role-name Enter a text string for the name of the user role up to 63 characters. These are 3 system
dened roles you can modify: secadmin, netadmin, and netoperator.
reset Enter the keyword reset to reset all roles back to default for that command.
command Enter the command’s keywords to assign the command to a certain access level. You can
enter one or more keywords.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
1458 Security