Administrator Guide

1 1 up up 7200
1 2 up up 7200
1 3 up up 7200
Speed in RPM
Dell#
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking technical support to perform troubleshooting.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU memory usage for the
stack member designated by unit-id.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the SPACE
BAR to view the next 24 lines. Press the ENTER key to view the next line of text.
When using the pipe command ( | ), enter one of these keywords to lter command
output. For details about ltering commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
flash: Save to local ash drive (flash://filename. A maximum of 20 characters.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced save to the le options.
7.6.1.0 Introduced on the S-Series.
Usage Information
Without the page or stack-unit option, the command output is continuous. To interrupt the command
output, use Ctrl-z.
The save option works with other ltering commands. This allows you to save specic information of a show
command. The save entry must always be the last option. For example: Dell#show tech-support |grep
Control and Monitoring 147