Administrator Guide

sow collector
Congure a collector device to which sFlow datagrams are forwarded.
Syntax
sflow collector {ip-address | ipv6-address} agent-addr {ip-address | ipv6-
address} [number [max-datagram-size number]] | [max-datagram-size number] [vrf
management]
To delete a congured collector, use the no sflow collector {ip-address | ipv6-address}
agent-addr {ipv4-address | ipv6-address} [number [max-datagram-size number]] |
[max-datagram-size number] [vrf management] command.
Parameters
sow collector ip-
address | ipv6-
address
Enter the IP address of the collector in dotted decimal format for IPv4 or x:x:x:x::x format
for IPv6.
NOTE: The :: notation species successive hexadecimal elds of zeros.
agent-addr ip-
address | ipv6-
address
Enter the keyword agent-addr followed by the sFlow agent IP address in dotted
decimal format for IPv4 or x:x:x:x::x format for IPv6.
NOTE: The :: notation species successive hexadecimal elds of zeros.
number (OPTIONAL) Enter the user datagram protocol (UDP) port number. The range is from 0
to 65535. The default is 6343.
max-datagram-size
number
(OPTIONAL) Enter the keyword max-datagram-size then the size number in bytes. The
range is from 400 to 1500. The default is 1400.
vrf management (OPTIONAL) Enter the keyword vrf followed by the keyword management to congure
the collector device corresponding to the default VRF and the management VRF
respectively.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
sFlow 1473