Administrator Guide

This conguration is applicable only for an LLDP proxy gateway. A typical use example is a square VLT topology
with single link connecting to the remote peers.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# vlt-peer-mac transmit
show vlt-proxy-gateway
Displays the VLT proxy gateway conguration.
S3048–ON
Syntax
show vlt-proxy-gateway [info] {lldp | static}
Parameters
lldp Enter the keyword lldp to display details about the LLDP VLT proxy gateway
conguration.
static Enter the keyword static to display details about the static VLT proxy gateway
conguration.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information
The proxy-gateway feature may go operationally down for any of the following reasons:
• LLDP is globally disabled.
• LDP is disabled per port.
• VLT port-channel is down.
• LLDP neighbor is down.
If any of these conditions is true, the proxy-gateway feature could be operationally down. If so, it is shown in the
show command output.
When more than one VLT port-channel terminates on the same ToR, the show VLT proxy-gateway info
lldp command output may show the port-channel ID incorrectly.
VLT Proxy Gateway 1659