Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1671

Example

Dell# Dell(conf-if-vl-100)#show vlt detail

Local LAG Id Peer LAG Id Local Status Peer Status Active VLANs

------------ ----------- ------------ ----------- -------------

10 10 UP UP 100, 200, 300, 400,

show vlt inconsistency

Display run-time inconsistencies in the incoming interface (IIF) for spanned multicast routes (mroutes).

Syntax

show vlt inconsistency ip mroute

Command Modes EXEC

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.2(0.2) Introduced on the Z9000, S4810, and S4820T.

9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux

(PMUX) mode only.

9.0.2.0 Introduced on the S6000.

Example

Dell#show vlt inconsistency ip mroute

Spanned Multicast Routing IIF Inconsistency

Multicast Route LocalIIF PeerIIF

--------------- ---------- ---------

(22.22.22.200, 225.1.1.2) VLAN 5 VLAN 6

(*, 225.1.1.2) VLAN 15 gi 1/5

Dell#

show vlt mismatch

Display mismatches in VLT parameters.