Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

331

332

333

334

335

336

337

338

339

340

Example

Dell(conf-if-gi-1/3)# bfd interval 250 min_rx 300 multiplier 4 role passive

Dell(conf-if-gi-1/3)#

bfd neighbor

Establish a BFD session with a neighbor.

Syntax

bfd neighbor ip-address

To remove the BFD session with the neighbor, use the no bfd neighbor ip-address command.

Parameters

ip-address Enter the IP address of the neighbor in dotted decimal format (A.B.C.D).

Defaults None

Command Modes INTERFACE

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.10.0 Introduced on the S4810.

8.2.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the C-Series.

7.5.1.0 Added support for VLAN and port-channel interfaces on the E-Series.

Related Commands

• show bfd neighbors — display the BFD neighbor information on all interfaces or a specied interface.

bfd protocol-liveness

Enable the BFD protocol liveness feature.