Administrator Guide
QoS Optimization for IPv6 ACLs does not impact the CAM usage for applying a policy on a single (or the rst of
several) interfaces. It is most useful when a policy is applied across multiple interfaces; it can reduce the impact to
CAM usage across subsequent interfaces.
The following describes the test cam-usage command shown in the following example.
Term Explanation
Stack-Unit
Lists the stack unit or units that are checked. Entering all shows the status for all stacks.
Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are checked. Entering all
shows the status for stack-units and port-pipes in the chassis. The port set value is from
0 to 0.
CAM Partition Shows the CAM prole of the CAM.
Available CAM Identies the amount of CAM space remaining for that prole.
Estimated CAM per
Port
Estimates the amount of CAM space the listed policy will require.
Status Indicates whether or not the policy will be allowed in the CAM.
Example
Dell# test cam-usage service-policy input In stack-unit all
Stack-Unit|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port|Status
----------------------------------------------------------------------------
1 | 0 | IPv4Flow | 102 | 0| Allowed
1 | 0 | IPv4Flow | 102 | 0| Allowed
Dell#
!
Dell# test cam-usage service-policy input In stack-unit 1 port-set 0
Stack-Unit|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port|Status
-----------------------------------------------------------------------------
1 | 0 | IPv4Flow | 102 | 0| Allowed
Dell#
Content Addressable Memory (CAM) 475