Administrator Guide
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information
Use this command to associate the system with one or more DNS servers.
In a dual stack setup, the system sends both A (request for IPv4 — RFC 1035) and AAAA (request for IPv6 —
RFC 3596) record requests to a DNS server even if only the ip name-server command is congured.
Example
• Dell(conf)#ip name-server vrf jay 2.2.2.2
• Dell(conf)#ip name-server vrf jay 2.2.2.2 3.3.3.3 4.4.4.4 5.5.5.5 6.6.6.6
7.7.7.7
ip domain-name
Congures the default domain corresponding to a specic VRF. This domain is appended to the in complete DNS requests corresponding to
the specied VRF.
Syntax
ip domain-name [vrf vrf-name] name
To undo the domain name conguration corresponding to a specic VRF, use the no ip domain-name [vrf
vrf-name] name command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to congure the
domain corresponding to that VRF.
name Enter the name of the domain to be appended to the in complete DNS requests
corresponding to the specied VRF.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Dynamic Host Conguration Protocol (DHCP) 545