Administrator Guide
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.2.1.0 Introduced.
Usage Information
The patch lename includes the Dell Networking OS version, the platform, the CPU, and the process it aects
(FTOS-platform-cpu-process-patchversion.rtp). For example, a patch labeled “7.8.1.0-EH-rp2-
l2mgr-1.rtp” identies that this patch applies to Dell Networking OS version 7.8.1.0 — E-Series platform, for RP2,
addressing the layer 2 management process, and this patch is the rst version of this patch.
There is no need to reload or reboot the system when you insert the patch. The In-Service Modular patch replaces
the existing process code. After installation is complete, the system executes the patch code as though it was
always there.
Related Commands
• show patch — display the system patches loaded with the in-service modular hot fix command.
process restartable
Enable a process to be restarted. Restartability is subject to a maximum restart limit. This limit is dened as a congured number of restarts
within a congured amount of time. On the software exception that exceeds the limit, the system reloads (for systems with a single RPM)
or fails over (for systems with dual RPMs).
Syntax
process restartable [process] [count number] [period minutes]
Parameters
process Congure a process to be restartable.
count number Enter the number of times a process can restart within the congured period. The range
is from 1 to 3. The default is 3.
period minutes Enter the amount of time within which the process can restart count times. The range is
from 1 to 60 minutes. The default is 60 minutes.
Default By default, a process can be restarted a maximum of three times within one hour. On the exception that exceeds
this limit, the system reloads or fails over.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
592 High Availability (HA)