Administrator Guide
cd
Change to a dierent working directory.
Syntax
cd [flash: | usbflash:] <directory name and path>
Parameters
ash: Use the keyword flash: to change the current directory to internal ash and its sub
directories.
usbash: Use the keyword usbflash: to change the current directory to the inserted USB.
directory name and
path
Enter the directory name and path as follows: directory name
([[flash://]directory_path])
NOTE: The cd command without any arguments will change the current directory to ash:
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added NFS mount support. Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
copy
Copy one le to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, HTTP, TFTP, and SCP (in the hostip
eld).
Syntax
copy source-file-url destination-file-url
Parameters
compressed-cong Enter the keywords compressed-config to copy a le from the current system
conguration.
ash: Enter the keyword flash: to copy from the local le system
([flash://]filepath).
60 File Management