Administrator Guide

Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.2.1.0 Added support for 4093 VLANs on E-Series. Prior releases supported 2094.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-Version 6.1.1.0 Introduced on the E-Series.
Example (Single
Range)
This example shows how to dene an interface range macro named test. Execute the show running-config
command to display the macro denition.
Dell(config)# define interface-range test gigabitethernet 1/1 - 1/3,
gigabitethernet 5/1 - 5/22, gigabitethernet 3/1 - 3/8
Dell# show running-config | grep define
define interface-range test gigabitethernet 1/1 - 1/3, gigabitethernet 5/1 -
5/22,
gigabitethernet 3/1 - 3/8
Dell(config)# interface range macro test
Dell(config-if-range-gi-1/1-1/3,te-5/1-5/22,te-3/1-3/8)#
Related Commands
• interface range – congure a range of command (bulk conguration).
• interface range macro name – run an interface range macro.
interface range macro name
Run the interface-range macro to automatically congure the pre-dened range of interfaces.
Syntax
interface range macro name
650 Interfaces