Administrator Guide

show hardware
Display the hardware counters on a specied interface or on a specied stack unit.
Syntax
show hardware {counters interface interface—type slot/port | stack-unit stack-
unit-number unit unit-number counters}
Parameters
counters Enter the keyword counters to display the counters on a specied interface.
interface Enter the keyword interface followed by the interface information and the slot/port
number.
stack-unit Enter the keyword stack-unit followed by a stack unit-number to display the counters
on a specied stack unit.
unit Enter the keyword unit followed by a unit-number.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S3048–ON.
9.10(0.1) Introduced on the S3100 series, S4820T, and S5000.
Usage Information
Use the show hardware counters interface interface—type slot/port to view the hardware
counters on the specied interface.
Use the show hardware stack-unit stack-unit-number unit unit-number counters to view
the hardware counters on the specied stack unit.
Example
Dell#show hardware counters interface gigabitethernet 10/1
unit: 0 port: 1 (interface Gi 10/1)
Description Value
RX - IPV4 L3 Unicast Frame Counter 0
RX - IPV4 L3 Routed Multicast Packets 0
RX - IPV6 L3 Unicast Frame Counter 0
RX - IPV6 L3 Routed Multicast Packets 0
RX - Unicast Packet Counter 0
RX - 64 Byte Frame Counter 0
RX - 65 to 127 Byte Frame Counter 0
RX - 128 to 255 Byte Frame Counter 0
RX - 256 to 511 Byte Frame Counter 0
RX - 512 to 1023 Byte Frame Counter 0
RX - 1024 to 1518 Byte Frame Counter 0
RX - 1519 to 1522 Byte Good VLAN Frame Counter 0
RX - 1519 to 2047 Byte Frame Counter 0
RX - 2048 to 4095 Byte Frame Counter 0
RX - 4096 to 9216 Byte Frame Counter 0
RX - Good Packet Counter 0
RX - Packet/Frame Counter 0
RX - Unicast Frame Counter 0
Interfaces 665