Administrator Guide

mac {dest-mac |
source-dest-mac |
source-mac}
Enter the keywords to distribute MAC trac based on the following criteria:
• dest-mac — Uses the destination MAC address, VLAN, Ethertype, source module
ID and source port ID elds to hash. The hashing mechanism returns a 3-bit index
indicating which port the packet should be forwarded.
• source-dest-mac — Uses the destination and source MAC address, VLAN,
Ethertype, source module ID and source port ID elds to hash. The hashing
mechanism returns a 3-bit index indicating which port the packet should be
forwarded.
•
source-mac — Uses the source MAC address, VLAN, Ethertype, source module ID
and source port ID elds to hash. The hashing mechanism returns a 3-bit index
indicating which port the packet should be forwarded.
tcp-udp enable Enter the keywords to distribute trac based on the following:
• enable — Takes the TCP/UDP source and destination ports into consideration
when doing hash computations. This option is enabled by default.
ingress-port enable Enter the keywords to distribute trac based on the following:
• enable — Takes the source port into consideration when doing hash computations.
This option is disabled by default.
Defaults IP 4-tuple (IP SA, IP DA, Source Port, Destination Port)
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Added the ingress-port parameter for the S4810.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information By default, Dell Networking OS distributes incoming trac based on a hash algorithm using the following criteria:
• IP source address
• IP destination address
• TCP/UDP source port
768 IPv4 Routing