Administrator Guide
level-1 (OPTIONAL) Select this value to congure the hello multiplier independently for Level 1
adjacencies. This value is the default.
level-2 (OPTONAL) Select this value to congure the hello multiplier independently for Level 2
adjacencies.
Defaults multiplier = 3; level-1 (if not otherwise specied)
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
The holdtime (the product of the hello-multiplier multiplied by the hello-interval) determines how long a neighbor
waits for a hello packet before declaring the neighbor is down so routes can be recalculated.
Related Commands
• isis hello-interval — specify the length of time between hello packets.
isis hello padding
Turn ON or OFF padding of hello PDUs from INTERFACE mode.
Syntax
isis hello padding
To return to the default, use the no isis hello padding command.
Defaults Padding of hello PDUs is enabled (ON).
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Intermediate System to Intermediate System (IS-IS) 869