Administrator Guide

Link Aggregation Control Protocol (LACP)

This section contains commands for Dell Networks’ implementation of the link aggregation control protocol (LACP) for creating dynamic

link aggregation groups (LAGs) — known as “port-channels” in the Dell Networking OS.

NOTE: For static LAG commands based on the standards specied in the IEEE 802.3 Carrier sense multiple access with collision

detection (CSMA/CD) access method and physical layer specications, see Port Channel Commands .

Topics:

• clear lacp counters

• debug lacp

• lacp long-timeout

• lacp port-priority

• lacp system-priority

• port-channel-protocol lacp

• show lacp

clear lacp counters

Clear port channel counters.

Syntax

clear lacp port-channel-number counters

Parameters

port-channel-

number

Enter a port-channel number. The range is from 1 to 128.

Defaults Without a Port Channel specied, the command clears all Port Channel counters.

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

904 Link Aggregation Control Protocol (LACP)