Administrator Guide
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
advertise interface-port-desc
Advertise port descriptor.
Syntax
advertise interface-port-desc {description | port-id}
To remove the advertised port descriptor, use the no advertise interface—port—desc {description
| port-id} command.
Parameters
description Enter the keyword description then the interface description.
port-id Enter the keyword port-id then the port-id. The range is from 0 to 7.
Defaults None
Command Modes
CONFIGURATION (conf-lldp)
INTERFACE (conf-if-interface-lldp)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(2.0P1) Introduced the description and port-id options.
Usage Information
If you do not specify the option, by default the port-id takes higher precedence and sends the port-id in the LLDP
packets.
952 Link Layer Discovery Protocol (LLDP)