Administrator Guide

Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S8420T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Example
Dell# show running-config lldp
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description
hello 15
multiplier 3
no disable
Dell#
LLDP-MED Commands
The following are the LLDP-MED (Media Endpoint Discovery) commands.
Dell Networking OS LLDP-MED commands are an extension of the set of LLDP TLV advertisement commands.
As dened by ANSI/TIA-1057, LLDP-MED provides organizationally specic TLVs (Type Length Value), so that endpoint devices and
network connectivity devices can advertise their characteristics and conguration information. The Organizational Unique Identier (OUI)
for the Telecommunications Industry Association (TIA) is 00-12-BB.
• LLDP-MED Endpoint Device — any device that is on an IEEE 802 LAN network edge, can communicate using IP, and uses the LLDP-
MED framework.
• LLDP-MED Network Connectivity Device — any device that provides access to an IEEE 802 LAN to an LLDP-MED endpoint device,
and supports IEEE 802.1AB (LLDP) and TIA-1057 (LLDP-MED). The Dell Networking system is an LLDP-MED network connectivity
device.
Regarding connected endpoint devices, LLDP-MED provides network connectivity devices with the ability to:
• manage inventory
• identify physical location
• identify network policy
966
Link Layer Discovery Protocol (LLDP)