Users Guide
interface vlan vlan-id
2 Enable the VLAN.
INTERFACE VLAN mode
no shutdown
3 Set the PVLAN mode of the selected VLAN to isolated.
INTERFACE VLAN mode
private-vlan mode isolated
4 Add one or more host ports to the VLAN.
INTERFACE VLAN mode
tagged interface or untagged interface
You can enter the interfaces singly or in range format, either comma-delimited (slot/port,port,port) or hyphenated (slot/
port-port).
You can only add ports dened as host to the VLAN.
Example of Conguring Private VLAN Members
The following example shows the use of the PVLAN commands that are used in VLAN INTERFACE mode to congure the PVLAN member
VLANs (primary, community, and isolated VLANs).
Dell#conf
Dell(conf)# interface vlan 10
Dell(conf-vlan-10)# private-vlan mode primary
Dell(conf-vlan-10)# private-vlan mapping secondary-vlan 100-101
Dell(conf-vlan-10)# untagged Gi 2/1
Dell(conf-vlan-10)# tagged Gi 2/3
Dell(conf)# interface vlan 101
Dell(conf-vlan-101)# private-vlan mode community
Dell(conf-vlan-101)# untagged Gi 2/10
Dell(conf)# interface vlan 100
Dell(conf-vlan-100)# private-vlan mode isolated
Dell(conf-vlan-100)# untagged Gi 2/2
618
Private VLANs (PVLAN)