Concept Guide

Congure the Overload Bit for a Startup Scenario

For information about setting the router overload bit for a specic period of time after a switch reload is implemented, see the Intermediate

System to Intermediate System (IS-IS) section in the Dell Command Line Reference Guide for your system.

Viewing Files

You can only view le information and content on local le systems.

To view a list of les or the contents of a le, use the following commands.

• View a list of les on the internal ash.

EXEC Privilege mode

dir flash:

• View the running-conguration.

EXEC Privilege mode

show running-config

• View the startup-conguration.

EXEC Privilege mode

show startup-config

Example of the dir Command

The output of the dir command also shows the read/write privileges, size (in bytes), and date of modication for each le.

DellEMC#dir

Directory of flash:

1 drw- 32768 Jan 01 1980 00:00:00 .

2 drwx 512 Jul 23 2007 00:38:44 ..

3 drw- 8192 Mar 30 1919 10:31:04 TRACE_LOG_DIR

4 drw- 8192 Mar 30 1919 10:31:04 CRASH_LOG_DIR

5 drw- 8192 Mar 30 1919 10:31:04 NVTRACE_LOG_DIR

6 drw- 8192 Mar 30 1919 10:31:04 CORE_DUMP_DIR

7 d--- 8192 Mar 30 1919 10:31:04 ADMIN_DIR

8 -rw- 33059550 Jul 11 2007 17:49:46 FTOS-EF-7.4.2.0.bin

9 -rw- 27674906 Jul 06 2007 00:20:24 FTOS-EF-4.7.4.302.bin

10 -rw- 27674906 Jul 06 2007 19:54:52 boot-image-FILE

11 drw- 8192 Jan 01 1980 00:18:28 diag

12 -rw- 7276 Jul 20 2007 01:52:40 startup-config.bak

13 -rw- 7341 Jul 20 2007 15:34:46 startup-config

14 -rw- 27674906 Jul 06 2007 19:52:22 boot-image

15 -rw- 27674906 Jul 06 2007 02:23:22 boot-flash

--More--

View Conguration Files

Conguration les have three commented lines at the beginning of the le, as shown in the following example, to help you track the last

time any user made a change to the le, which user made the changes, and when the le was last saved to the startup-conguration.

In the running-conguration le, if there is a dierence between the timestamp on the “Last conguration change” and “Startup-cong last

updated,” you have made changes that have not been saved and are preserved after a system reboot.

Example of the show running-config Command

DellEMC#show running-config

Current Configuration ...

Getting Started