Concept Guide
MIB Object OID Object Values Description
• If copySourceFileType is set
to running-cong or startup-
cong, copySrcFileName is
not required.
copyDestFileType .1.3.6.1.4.1.6027.3.5.1.1.1.1.5
1 = Dell EMC Networking OS le
2 = running-cong
3 = startup-cong
Species the type of le to copy
to.
• If copySourceFileType is
running-cong or startup-
cong, the default
copyDestFileLocation is
ash.
• If copyDestFileType is a
binary, you must specify
copyDestFileLocation and
copyDestFileName.
copyDestFileLocation .1.3.6.1.4.1.6027.3.5.1.1.1.1.6
1 = ash
2 = slot0
3 = tftp
4 = ftp
5 = scp
Species the location of
destination le.
• If copyDestFileLocation is
FTP or SCP, you must
specify copyServerAddress,
copyUserName, and
copyUserPassword.
copyDestFileName .1.3.6.1.4.1.6027.3.5.1.1.1.1.7 Path (if the le is not in the
default directory) and lename.
Species the name of
destination le.
copyServerAddress .1.3.6.1.4.1.6027.3.5.1.1.1.1.8 IP Address of the server. The IP address of the server.
• If you specify
copyServerAddress, you
must also specify
copyUserName and
copyUserPassword.
copyUserName .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 Username for the server. Username for the FTP, TFTP, or
SCP server.
• If you specify
copyUserName, you must
also specify
copyUserPassword.
copyUserPassword .1.3.6.1.4.1.6027.3.5.1.1.1.1.10 Password for the server. Password for the FTP, TFTP, or
SCP server.
Copying a Conguration File
To copy a conguration le, use the following commands.
NOTE
: In UNIX, enter the snmpset command for help using the following commands. Place the
f10-copy-cong.mib
le in the
directory from which you are executing the snmpset command or in the snmpset tool path.
1 Create an SNMP community string with read/write privileges.
CONFIGURATION mode
Simple Network Management Protocol (SNMP)
833