Concept Guide

MIB Support for LAG
Dell EMC Networking provides a method to retrieve the congured LACP information (Actor and Partner). Actor (local interface) is to
designate the parameters and ags pertaining to the sending node, while the term Partner (remote interface) is to designate the sending
node’s view of its peer parameters and ags. LACP provides a standardized means for exchanging information, with partner systems, to
form a link aggregation group (LAG). The following table lists the related MIB objects:
Table 97. MIB Objects for LAG
MIB Object OID Description
lagMIB 1.2.840.10006.300.43 Contains information about link aggregation
module for managing 802.3ad.
lagMIBObjects 1.2.840.10006.300.43.1
dot3adAgg 1.2.840.10006.300.43.1.1
dot3adAggTable 1.2.840.10006.300.43.1.1.1 Contains information about every
Aggregator that is associated with a system.
dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 Contains a list of Aggregator parameters and
indexed by the ifIndex of the Aggregator.
dot3adAggMACAddress 1.2.840.10006.300.43.1.1.1.1.1 Contains a six octet read–only value carrying
the individual MAC address assigned to the
Aggregator.
dot3adAggActorSystemPriority 1.2.840.10006.300.43.1.1.1.1.2 Contains a two octet read–write value
indicating the priority value associated with
the Actor’s system ID.
dot3adAggActorSystemID 1.2.840.10006.300.43.1.1.1.1.3 Contains a six octet read–write MAC
address value used as a unique identier for
the system that contains the Aggregator.
dot3adAggAggregateOrIndividual 1.2.840.10006.300.43.1.1.1.1.4 Contains a read–only boolean value (True or
False) indicating whether the Aggregator
represents an Aggregate or an Individual link.
dot3adAggActorAdminKey 1.2.840.10006.300.43.1.1.1.1.5 Contains a 16–bit read–write value which is
the current administrative key.
dot3adAggActorOperKey 1.2.840.10006.300.43.1.1.1.1.6 Contains a 16–bit read–write value which is
the operational key.
dot3adAggPartnerSystemID 1.2.840.10006.300.43.1.1.1.1.7 Contains a six octet read–only MAC address
value consisting of an unique identier for
the current Protocol partner of the
Aggregator.
dot3adAggPartnerSystemPriority 1.2.840.10006.300.43.1.1.1.1.8 Contains a two octet read–only value that
indicates the priority value associated with
the Partner’s system ID.
dot3adAggPartnerOperKey 1.2.840.10006.300.43.1.1.1.1.9 Contains the current operational value of the
key for the Aggregator’s current protocol
partner.
dot3adAggCollectorMaxDelay 1.2.840.10006.300.43.1.1.1.1.10 Contains a 16–bit read–write attribute
dening the maximum delay, in tens of
Simple Network Management Protocol (SNMP) 847