Connectivity Guide

Supported Releases 10.3.1E or later
vlan
Associates an existing VLAN ID to the vfabric to carry trac.
Syntax
vlan vlan-ID
Parameters vlan-ID — Enter an existing VLAN ID.
Defaults Not congured
Command Mode Vfabric CONFIGURATION
Usage Information
Create the VLAN ID before associating it to the vfabric. Do not use spanned VLAN as vfabric VLAN. The no
version of this command removes the VLAN ID from the vfabric.
Example
OS10(config)# interface vlan 1023
OS10(conf-if-vl-1023)# exit
OS10(config)# vfabric 100
OS10(conf-vfabric-100)# vlan 1023
Supported Releases 10.3.1E or later
FIP-snooping commands
The following commands are supported on FIP-snooping mode:
feature p-snooping
Enables the FIP snooping feature globally.
Syntax
feature fip-snooping
Parameters None
Defaults Disabled
Command Mode CONFIGURATION
Usage Information
You can enable only one of the following at a time: F_Port, NPG, or FSB.
The no version of this command disables FIP snooping. When you disable FIP snooping, the system automatically
deletes all the FIP snooping VLAN and port mode congurations.
Example
OS10(config)# feature fip-snooping
Supported Releases 10.4.0E(R1) or later
154 Fibre Channel