Connectivity Guide

– The RD auto-congures as Type 1 from the overlay network source IP address and the auto-generated EVI
index.
– The RT auto-congures as Type 2 from the 4-byte AS and the 2-byte EVI (Type encoded as 0x0202).
Example
OS10(config)# evpn
OS10(config-evpn)# auto-evi
Supported releases 10.4.2.0 or later
evi
Creates an EVPN instance (EVI) in EVPN mode.
Syntax
evi id
Parameters
id
Enter the EVPN instance ID (1 to 65535).
Default Not congured
Command mode EVPN
Usage information If an MP-BGP network uses 4-byte autonomous systems or if you need to specify the Route Distinguisher and
Route Target values, manually congure EVPN instances and associate each EVI with the overlay VXLAN virtual
network. The EVI is activated only when the VXLAN network ID (VNI), Router Distinguisher, Route Target, and
virtual network are congured.
Example
OS10(config)# evpn
OS10(config-evpn)# evi 10
OS10(config-evpn-evi)#
Supported releases 10.4.2.0 or later
evpn
Enable the EVPN control plane for VXLAN.
Syntax
evpn
Parameters None
Default Not congured
Command mode CONFIGURATION
Usage information Enabling EVPN triggers BGP to advertise EVPN capability with AFI=25 and SAFI=70 to all BGP peers in an
autonomous system. The no evpn command disables EVPN on the switch.
Example
OS10(config)# evpn
OS10(config-evpn)#
Supported releases 10.4.2.0 or later
560 VXLAN