Connectivity Guide

• incomplete — Enter to not advertise to peers.
Default Not congured
Command Mode ROUTE-MAP
Usage Information The no version of this command deletes the set clause from a route map.
Example
OS10(conf-route-map)# set origin egp
Supported Releases 10.2.0E or later
set tag
Sets a tag for redistributed routes.
Syntax
set tag tag-value
Parameters tag-value — Enter a tag number for the route to redistribute, from 0 to 4294967295.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command deletes the set clause from a route map.
Example
OS10(conf-route-map)# set tag 23
Supported Releases 10.2.0E or later
set weight
Set the BGP weight for the routing table.
Syntax
set weight weight
Parameters weight — Enter a number as the weight the route uses to meet the route map specication, from 0 to 65535.
Default Default router-originated is 32768 — all other routes are 0.
Command Mode ROUTE-MAP
Usage Information The no version of the command deletes the set clause from the route map.
Example
OS10(conf-route-map)# set weight 200
Supported Releases 10.2.0E or later
show route-map
Displays the current route map congurations.
Syntax
show route-map [map-name]
Parameters map-name — (Optional) Specify the name of a congured route map. A maximum of 140 characters.
Defaults None
772 Access Control Lists