Reference Guide

feature fc
Enables the F_Port globally.
Syntax
feature fc domain-id domain-id
Parameters domain-id — Enter the domain ID of the F_Port, from 1 to 239.
Defaults Disabled
Command Mode CONFIGURATION
Usage Information
The no version of this command disables the F_Port. You can disable the F_Port only when vfabric and zoning
congurations are not available. Before disabling the F_Port, remove the vfabric and zoning congurations.
Example
OS10(config)# feature fc domain-id 100
Supported Releases 10.3.1E or later
feature fc npg
Enables the NPG mode globally.
Syntax
feature fc npg
Parameters None
Defaults Disabled
Command Mode CONFIGURATION
Usage Information
The no version of this command disables the NPG mode. You can enable only any one of the following at a time:
F_Port, FIP snooping bridge, or NPG.
Example
OS10(config)# feature fc npg
Supported Releases 10.4.0E(R1) or later
feature p-snooping
Enables the FIP snooping feature globally.
Syntax
feature fip-snooping
Parameters None
Defaults Disabled
Command Mode CONFIGURATION
Usage Information
The no version of this command disables FIP snooping.
Example
OS10(config)# feature fip-snooping
Fibre channel 129