Reference Guide

Active ZoneSet: set
=================================
Members
fibrechannel1/1/1
fibrechannel1/1/2
fibrechannel1/1/3
fibrechannel1/1/4
fibrechannel1/1/5
fibrechannel1/1/6
fibrechannel1/1/7
fibrechannel1/1/8
fibrechannel1/1/9
fibrechannel1/1/10
fibrechannel1/1/11
fibrechannel1/1/12
fibrechannel1/1/15
fibrechannel1/1/17
fibrechannel1/1/18
fibrechannel1/1/19
fibrechannel1/1/20
fibrechannel1/1/21
fibrechannel1/1/22
fibrechannel1/1/23
fibrechannel1/1/24
fibrechannel1/1/25:1
fibrechannel1/1/29:1
fibrechannel1/1/30:1
fibrechannel1/1/30:3
====================================
Supported Releases
10.3.1E or later
vfabric
Congures a virtual fabric (vfabric). Enable the F_Port before conguring a vfabric. You can congure only one vfabric in F_Port mode. The
vfabric becomes active only when you congure the vfabric with a valid VLAN and FC map. Do not use spanned VLAN as vfabric VLAN.
Syntax
vfabric fabric-ID
Parameters fabric-ID — Enter the fabric ID, from 1 to 255.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command removes the vfabric. You can remove a vfabric only when it is not applied on any
interfaces.
Example
OS10(config)# vfabric 100
Supported Releases 10.3.1E or later
vfabric (interface)
Applies an existing vfabric to an FC interface.
Syntax
vfabric fabric-ID
Parameters fabric-ID — Enter the fabric ID, from 1 to 255.
Fibre channel 141