Reference Guide
Command Mode EXEC
Usage Information None
Example
OS10# clear qos statistics type qos interface ethernet 1/1/5
Example (control-
plane)
OS10# clear qos statistics type control-plane interface ethernet 1/1/7
Example (queuing)
OS10# clear qos statistics type queuing interface ethernet 1/1/2
Supported Releases 10.2.0E or later
control-plane
Enters Control-Plane mode.
Syntax
control-plane
Parameters None
Default Not congured
Command Mode CONTROL-PLANE
Usage Information If you attach an access-list to the class-map type of control-plane, the access-list ignores the permit and
deny keywords.
Example (class-map)
OS10(config)# class-map type control-plane match-any c1
OS10(conf-cmap-control-plane)#
Example (policy-
map)
OS10(config)# policy-map type control-plane p1
OS10(conf-pmap-control-plane)#
Supported Releases 10.2.0E or later
owcontrol
Enables or disables link-level ow control on an interface.
Syntax
flowcontrol [receive | transmit] [on | off]
Parameters
• receive — (Optional) Indicates the port can receive ow control packets from a remote device.
• transmit — (Optional) Indicates the local port can send ow control packets to a remote device.
• on — (Optional) When used with receive, allows the local port to receive ow control trac. When used
with transmit, allows the local port to send ow control trac to the remote device.
• off — (Optional) When used with receive, disables the remote device from sending ow control trac to
the local port. When used with transmit, disables the local port from sending ow control trac to the
remote device.
Default Disabled (off)
Command Mode INTERFACE
Usage Information The no version of this command returns the value to the default.
572 Quality of service