Service Manual

3. (Optional) Identify the tracked object with a text description.
OBJECT TRACKING mode
description text
The text string can be up to 80 characters.
4. (Optional) Display the tracking configuration and the tracked object’s status.
EXEC Privilege mode
show track object-id
Examples of IPv4 and IPv6 Tracking Route Reachability
Examples of IPv4 and IPv6 Tracking Route Reachability
The following example configures object tracking on the reachability of an IPv4 route:
Dell(conf)#track 104 ip route 10.0.0.0/8 reachability
Dell(conf-track-104)#delay up 20 down 10
Dell(conf-track-104)#end
Dell#show track 104
Track 104
IP route 10.0.0.0/8 reachability
Reachability is Down (route not in route table)
2 changes, last change 00:02:49
Tracked by:
Dell#configure
Dell(conf)#track 4 ip route 3.1.1.0/24 reachability vrf
vrf1
The following example configures object tracking on the reachability of an IPv6 route:
Dell(conf)#track 105 ipv6 route 1234::/64 reachability
Dell(conf-track-105)#delay down 5
Dell(conf-track-105)#description Headquarters
Dell(conf-track-105)#end
Dell#show track 105
Track 105
IPv6 route 1234::/64 reachability
Description: Headquarters
Reachability is Down (route not in route table)
2 changes, last change 00:03:03
Tracking a Metric Threshold
Use the following commands to configure object tracking on the metric threshold of an IPv4 or IPv6
route.
To remove object tracking, use the no track object-id command.
1. (Optional) Reconfigure the default resolution value used by the specified protocol to scale the metric
for IPv4 or IPv6 routes.
CONFIGURATION mode
track resolution {ip route | ipv6 route} {isis resolution-value | ospf
resolution-value}
Object Tracking
655