Users Guide

ip ssh server port
Configures the SSH server listening port.
Syntax
ip ssh server port port-number
Parameters port-number — Enter the listening port number, from 1 to 65535.
Default 22
Command Mode CONFIGURATION
Usage
Information
TSupported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.1.
The no version of this command removes the configuration.
Example
OS10(config)# ip ssh server port 255
Supported
Releases
10.3.0E or later
ip ssh server pubkey-authentication
Enables public key authentication for the SSH server.
Syntax
ip ssh server pubkey-authentication
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage
Information
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.1.
The no version of this command disables the public key authentication.
Example
OS10(config)# ip ssh server pubkey-authentication
Supported
Releases
10.3.0E or later
ip ssh server vrf
Configures an SSH server for the management or non-default VRF instance.
Syntax
ip ssh server vrf {management | vrf-name}
Parameters
● management — Configures the management VRF instance to reach the SSH server.
● vrf-name — Enter the VRF instance used to reach the SSH server.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
The SSH server uses the management VRF.
Example
OS10(config)# ip ssh server vrf management
OS10(config)# ip ssh server vrf vrf-blue
Supported
Releases
10.4.0E(R1) or later
1156 Security