Users Guide

Usage
Information
None
Example
OS10# show control-plane statistics
Queue Packets Bytes Dropped Packets Dropped Bytes
0 0 0 0 0
1 0 0 0 0
2 0 0 0 0
3 0 0 0 0
4 0 0 0 0
5 0 0 0 0
6 3 204 0 0
7 6 408 0 0
8 0 0 0 0
9 0 0 0 0
10 0 0 0 0
11 0 0 0 0
12 0 0 0 0
13 0 0 0 0
14 0 0 0 0
15 0 0 0 0
16 0 0 0 0
17 0 0 0 0
18 0 0 0 0
19 0 0 0 0
20 0 0 0 0
21 0 0 0 0
22 0 0 0 0
OS10#
Supported
Releases
10.2.0E or later
show hardware deep-buffer-mode
Displays the status of Deep buffer mode in the current and next boot of the switch.
Syntax
show hardware deep-buffer-mode
Parameters None
Defaults Not configured
Command Modes EXEC
Usage
Information
Applicable only for the S4200-ON series switches.
Example
Example: default setting
OS10# show hardware deep-buffer-mode
Deep Buffer Mode Configuration Status
-------------------------------------------
Current-boot Settings : Disabled
Next-boot Settings : Disabled
Example: saved to startup configuration
OS10# show hardware deep-buffer-mode
Deep Buffer Mode Configuration Status
-------------------------------------------
Current-boot Settings : Disabled
Next-boot Settings : Enabled
Quality of service 1381