Users Guide

5. Check if the server is up and running.
Downgrade to Release 10.5.0.0 or earlier releases
In this example, the OS10 switch runs the 10.5.1.0 software and the following procedure downgrades the system to Release
10.5.0.0.
NOTE:
● If the version that you are downgrading to is present in the system as the standby image, you can rollback to that
release without losing any configuration or license data. Use the show boot detail command to view the standby
image version. See Rollback from 10.5.1.0 or later release to 10.5.0.0 or earlier release for more information.
● If the image that you are downgrading to is newly installed using the image install command, backup of the original
configuration data will not be available. The system boots with the default configuration.
NOTE: While downgrading to an earlier release, OS10 removes the existing 10.5.1.0 image. This process takes about 10
minutes to 20 minutes of downtime, depending on your device.
Prerequisites
Obtain a backup of the configuration data. Ensure that you have a copy of the license files. Reapply the configuration data and
licenses files after you reload the 10.5.0.0 or earlier image.
1. Back up the current running configuration to the startup configuration in EXEC mode.
OS10# copy running-configuration startup-configuration
2. Back up the startup configuration (startup.xml) in EXEC mode.
copy config://startup.xml ftp://userid:passwd@hostip/filepath/10.5.0.0-startup.xml
3. Download the OS10 binary image for Release 10.5.0.0, also called the standby image, from a local server using the image
download server-filepath/filename command in EXEC mode; for example:
OS10# image download sftp://admin:passwd@10.1.1.1/home/admin/images/OS10EE.bin
4. (Optional) View the current software download status in EXEC mode.
OS10# show image status
5. Install the OS10 standby image using the image install file-url command in EXEC mode, where filename is the
name of the image file downloaded in Step 3 with the image download command; for example:
OS10# image install image://OS10EE.bin
6. (Optional) View the status of the software installation in EXEC mode.
OS10# show image status
Image Upgrade State: idle
==================================================
File Transfer State: transfer-success
--------------------------------------------------
State Detail: Completed: No error
Task Start: 2019-11-19T06:55:44Z
Task End: 2019-11-19T06:55:53Z
Transfer Progress: 100 %
Transfer Bytes: 469343880 bytes
File Size: 469343880 bytes
Transfer Rate: 67812 kbps
Installation State: install-failed
--------------------------------------------------
State Detail: Failed: Downgrade image staged for clean
install. Reload to downgrade.
Task Start: 2019-11-19T06:55:53Z
Task End: 2019-11-19T06:56:01Z
Getting Started with Dell EMC SmartFabric OS10
49