Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

271

272

273

274

275

276

277

278

279

280

PG-grp Priority# BW-% BW-COMMITTED BW-PEAK TSA

% Rate(Mbps) Burst(KB) Rate(Mbps) Burst(KB)

----------------------------------------------------------------------------------

0 3 25 - - - - ETS

1 4 25 - - - - ETS

2 0,1,2,5,6,7 50 - - - - ETS

3 - - - - - -

4 - - - - - -

5 - - - - - -

6 - - - - - -

7 - - - - - -

Oper status is init

ETS DCBX Oper status is Down

Reason: Port Shutdown

State Machine Type is Asymmetric

Conf TLV Tx Status is enabled

Reco TLV Tx Status is enabled

The following example shows the show interface ets detail command.

Dell(conf)# show interfaces tengigabitethernet 1/1 ets detail

Interface TenGigabitEthernet 1/1

Max Supported TC Groups is 4

Number of Traffic Classes is 8

Admin mode is on

Admin Parameters :

------------------

Admin is enabled

TC-grp Priority# Bandwidth TSA

0 0,1,2,3,4,5,6,7 100% ETS

1 0% ETS

2 0% ETS

3 0% ETS

4 0% ETS

5 0% ETS

6 0% ETS

7 0% ETS

Priority# Bandwidth TSA

0 13% ETS

1 13% ETS

2 13% ETS

3 13% ETS

4 12% ETS

5 12% ETS

6 12% ETS

7 12% ETS

Remote Parameters:

-------------------

Remote is disabled

Local Parameters :