Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

541

542

543

544

545

546

547

548

549

550

Local Interface Te 1/4 has 1 neighbor

Total Frames Out: 6547

Total Frames In: 4136

Total Neighbor information Age outs: 0

Total Frames Discarded: 0

Total In Error Frames: 0

Total Unrecognized TLVs: 0

Total TLVs Discarded: 0

Next packet will be sent after 7 seconds

The neighbors are given below:

-----------------------------------------------------------------------

Remote Chassis ID Subtype: Mac address (4)

Remote Chassis ID: 00:01:e8:06:95:3e

Remote Port Subtype: Interface name (5)

Remote Port ID: TeGigabitEthernet 2/11

Local Port ID: TeGigabitEthernet 1/21

Locally assigned remote Neighbor Index: 4

Remote TTL: 120

Information valid for next 120 seconds

Time since last information change of this neighbor: 01:50:16

Remote MTU: 1554

Remote System Desc: Dell Networks Real Time Operating System Software

Dell Operating System Version: 1.0.

Build Time: Thu Aug 9 01:05:51 PDT 1999-2014

Existing System Capabilities: Repeater Bridge Router

Enabled System Capabilities: Repeater Bridge Router

Remote Port Vlan ID: 1

Port and Protocol Vlan ID: 1, Capability: Supported, Status: Enabled

---------------------------------------------------------------------------

========================================================================

Conguring LLDPDU Intervals

LLDPDUs are transmitted periodically; the default interval is 30 seconds.

To congure LLDPDU intervals, use the following command.

• Congure a non-default transmit interval.

CONFIGURATION mode or INTERFACE mode

hello

Example of Viewing LLDPDU Intervals

R1(conf)#protocol lldp

R1(conf-lldp)#show config

protocol lldp

advertise dot1-tlv port-protocol-vlan-id port-vlan-id

advertise dot3-tlv max-frame-size

advertise management-tlv system-capabilities system-description

no disable

R1(conf-lldp)#mode ?

rx Rx only

tx Tx only

R1(conf-lldp)#

mode tx