Concept Guide

Te 1/1 P3 0 0 0
Te 1/1 P4 0 0 0
Te 1/1 P5 0 0 0
Te 1/1 P6 0 0 0
Te 1/1 P7 0 0 0
The following example shows the show interface ets summary command.
DellEMC(conf)#do show interfaces te 1/1 ets summary
Interface TenGigabitEthernet 1/1
Max Supported TC is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
PG-grp Priority# BW-% BW-COMMITTED BW-PEAK TSA
% Rate(Mbps) Burst(KB) Rate(Mbps) Burst(KB)
----------------------------------------------------------------------------------
0 3 25 - - - - ETS
1 4 25 - - - - ETS
2 0,1,2,5,6,7 50 - - - - ETS
3 - - - - - -
4 - - - - - -
5 - - - - - -
6 - - - - - -
7 - - - - - -
Remote Parameters :
-------------------
Remote is disabled
Local Parameters :
------------------
Local is enabled
PG-grp Priority# BW-% BW-COMMITTED BW-PEAK TSA
% Rate(Mbps) Burst(KB) Rate(Mbps) Burst(KB)
----------------------------------------------------------------------------------
0 3 25 - - - - ETS
1 4 25 - - - - ETS
2 0,1,2,5,6,7 50 - - - - ETS
3 - - - - - -
4 - - - - - -
5 - - - - - -
6 - - - - - -
7 - - - - - -
Oper status is init
ETS DCBX Oper status is Down
Reason: Port Shutdown
State Machine Type is Asymmetric
Conf TLV Tx Status is enabled
Reco TLV Tx Status is enabled
The following example shows the show interface ets detail command.
DellEMC(conf)# show interfaces tengigabitethernet 1/1 ets detail
Interface TenGigabitEthernet 1/1
Max Supported TC Groups is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
310
Data Center Bridging (DCB)