Concept Guide
If you do not, the following error displays when you attempt to enable role-based only AAA authorization:
% Error: Exec authorization must be applied to more than one line to be useful, e.g. console
and vty lines. Could use default authorization method list as alternative.
5 Verify the conguration is applied to the console or VTY line.
DellEMC(conf)#do show running-config line
!
line console 0
login authentication test
authorization exec test
exec-timeout 0 0
line vty 0
login authentication test
authorization exec test
line vty 1
login authentication test
authorization exec test
To enable role-based only AAA authorization, enter the following command in Conguration mode:
DellEMC(conf)#aaa authorization role-only
System-Dened RBAC User Roles
By default, the Dell EMC Networking OS provides 4 system dened user roles. You can create up to 8 additional user roles.
NOTE
: You cannot delete any system dened roles.
The system dened user roles are as follows:
• Network Operator (netoperator) - This user role has no privilege to modify any conguration on the switch. You can access Exec mode
(monitoring) to view the current conguration and status information.
• Network Administrator (netadmin): This user role can congure, display, and debug the network operations on the switch. You can
access all of the commands that are available from the network operator user role. This role does not have access to the commands
that are available to the system security administrator for cryptography operations, AAA, or the commands reserved solely for the
system administrator.
• Security Administrator (secadmin): This user role can control the security policy across the systems that are within a domain or network
topology. The security administrator commands include FIPS mode enablement, password policies, inactivity timeouts, banner
establishment, and cryptographic key operations for secure access paths.
• System Administrator (sysadmin). This role has full access to all the commands in the system, exclusive access to commands that
manipulate the le system formatting, and access to the system shell. This role can also create user IDs and user roles.
The following summarizes the modes that the predened user roles can access.
Role Modes
netoperator
netadmin Exec Cong Interface Router IP Route-map Protocol MAC
secadmin Exec Cong Line
sysadmin Exec Cong Interface Line Router IP Route-map Protocol MAC
908
Security