Connectivity Guide
Parameters timeout-value — Enter the timeout value in seconds, from 0 to 3600.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command disables the timeout.
Example
OS10(config)# exec-timeout 300
OS10(config)#
Supported Releases 10.3.1E or later
kill-session
Terminate a user session.
Syntax
kill-session session-ID
Parameters session-ID — Enter the user session ID.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# kill-session 3
Supported Releases 10.3.1E or later
show sessions
Displays the active management sessions.
Syntax
show sessions
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to view information about the active user management sessions.
Example
OS10# show sessions
Current session's operation mode: Non-transaction
Session-ID User In-rpcs In-bad-rpcs Out-rpc-err Out-notify Login-time Lock
-----------------------------------------------------------------------------------------
3 snmp_user 114 0 0 0 2017-07-10T23:58:39Z
4 snmp_user 57 0 0 0 2017-07-10T23:58:40Z
6 admin 17 0 0 4 2017-07-12T03:55:18Z
*7 admin 10 0 0 0 2017-07-12T04:42:55Z
OS10#
Supported Releases 10.3.1E or later
100 System management