Connectivity Guide
Example (queue)
OS10(config)# policy-map type queuing pmap1
OS10(config-pmap-queuing)# class cmap1
OS10(config-pmap-c-que)# queue-limit queue-len 100
OS10(config-pmap-c-que)# queue-limit thresh-mode static 50
Supported Releases 10.3.0E or later
queue bandwidth
Congures a bandwidth for a given queue on interface.
Syntax
queue queue-number bandwidth bandwidth-percentage
Parameters
• queue-number — Enter the queue number.
• bandwidth-percentage — Enter the percentage of bandwidth.
Default Not congured
Command Mode POLICY-MAP-CLASS-MAP
Usage Information The no version of this command removes the bandwidth from the queue.
Example None
Supported Releases 10.4.0E(R1) or later
queue qos-group
Congures a dot1p trac class to a queue.
Syntax
queue number [qos-group dot1p-values]
Parameters
• queue number — Enter the trac single value queue ID, from 0 to 7.
• qos-group dot1p-values — (Optional) Enter either single, comma-delimited, or a hyphenated range of
dot1p values, from 0 to 7.
Default 0
Command Mode TRUST-MAP
Usage Information If the trust map does not dene trac class values to a queue, those ows map to the default queue 0. If some of
the trac class values are already mapped to an existing queue, you see an error. The no version of this command
returns the value to the default.
Example
OS10(conf-tmap-tc-queue-qos)# queue 2 qos-group 5
Supported Releases 10.3.0E or later
random-detect (interface)
Assigns a WRED prole to the specied interface.
Syntax
random-detect wred-profile
1010 Quality of service