Connectivity Guide

Supported Releases 10.3.0E or later
show qos ingress buer-statistics-tracking
Displays ingress priority group-level peak buer usage count in bytes for the given priority group on a given interface.
Syntax
show qos ingress buffer-statistics-tracking interface ethernet [node/slot/port]
[priority-group {0-7}] [detail]
Parameters
• node/slot/port—Enter the port information.
• [priority-group {0-7}]—Enter the priority-group keyword, followed by the group number.
• detail—Displays per MMU instance-level statistics in platforms with multiple MMU instances.
Default Not applicable
Command Mode EXEC
Usage Information When BST is enabled, if you make any conguration changes that aect the priority group or priority mapping
conguration, such as removal of class map, addition of class map to policy map (nqos), and so on, be sure to clear
the buer statistics using the clear qos statistics type buffer-statistics-tracking
command to view the actual peak buer utilization for the current conguration.
Example
OS10# show qos ingress buffer-statistics-tracking interface
ethernet 1/1/1 priority-group 0
Supported Releases 10.4.3.0 or later
show qos ingress buer-stats interface
Displays the buers statistics for the ingress interface.
Syntax
show qos ingress buffer-stats interface [interface node/slot/port[:subport]]
Parameters
• interface — (Optional) Enter the interface type.
• node/slot/port[:subport] — (Optional) Enter the port information.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show qos ingress buffer-stats interface ethernet 1/1/1
Interface : ethernet1/1/1
Speed : 0
Priority Used Total Used HDRM
Group buffers buffers
------------------------------------------------
0 0 0
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
1024 Quality of service