Connectivity Guide

Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use the details option to display PFC statistics on received/transmitted frames for each dot1p CoS value. Use
the clear qos statistics interface ethernet 1/1/1 command to delete PFC statistics and restart
the counter.
Example (details)
OS10(config)# show interface ethernet 1/1/15 priority-flow-control details
ethernet1/1/15
Admin Mode : true
Operstatus: true
PFC Priorities: 3
Total Rx PFC Frames: 0
Total Tx PFC frames: 587236
Cos Rx Tx
-----------------------
0 0 0
1 0 0
2 0 0
3 0 587236
4 0 0
5 0 0
6 0 0
7 0 0
Supported Releases 10.3.0E or later
Enhanced transmission selection
ETS provides customized bandwidth allocation to 802.1p classes of trac. Assign dierent amounts of bandwidth to Ethernet, FCoE, or
iSCSI trac classes that require dierent bandwidth, latency, and best-eort treatment during network congestion.
ETS divides trac into dierent priority groups using their 802.1p priority value. To ensure that each trac class is correctly prioritized and
receives the required bandwidth, congure bandwidth and queue scheduling for each priority group. To prioritize low-latency storage and
server-cluster trac, allocate more bandwidth to a priority group. To rate-limit best-eort LAN trac, allocate less bandwidth to a dierent
priority group.
Converged data center services
1093