Connectivity Guide

• management 1/1/1 — Enter the management interface.
• port-channel channel-id — Enter a port-channel ID, from 1 to 28.
• vlan vlan-id — Enter a VLAN ID, from 1 to 4093.
5 Congure the gpb encoding format in which data is streamed in SUBSCRIPTION-PROFILE mode.
OS10(conf-telemetry-sp-subscription)# encoding format
6 Congure the gRPC transport protocol used to stream data to a destination in SUBSCRIPTION-PROFILE mode. gRPC with Transport
Security Layer (TLS) certicates enabled is the default transport protocol. To disable TLS certicate exchange, use the transport
grpc no-tls command.
OS10(conf-telemetry-sp-subscription)# transport protocol [no-tls]
After you congure a subscription prole, the telemetry agent starts collecting data and streaming it to destination devices.
View telemetry conguration
Use the following show commands to display telemetry conguration.
OS10# show telemetry
Telemetry Status : enabled
-- Telemetry Destination Groups --
Group : dest1
Destination : 10.11.56.204 Port : 40001
-- Telemetry Sensor Groups --
Group : bgp
Sensor Path : bgp/bgp-oper/bgpPrfxCntrsEntry
Sensor Path : bgp/bgp-oper/bgpPeerCount
Group : bgp-peer
Sensor Path : infra-bgp/peer-state/peer-status
Group : buffer
Sensor Path : base-qos/queue-stat
Sensor Path : base-qos/priority-group-stat
Sensor Path : base-qos/buffer-pool-stat
Sensor Path : base-qos/buffer-pool
Group : device
Sensor Path : base-pas/chassis
Sensor Path : base-pas/card
Sensor Path : base-switch/switching-entities/switch-stats
Group : environment
Sensor Path : base-pas/entity
Sensor Path : base-pas/psu
Sensor Path : base-pas/fan-tray
Sensor Path : base-pas/fan
Sensor Path : base-pas/led
Sensor Path : base-pas/temperature
Sensor Path : base-pas/temp_threshold
Sensor Path : base-pas/media
Sensor Path : base-pas/media-channel
Group : interface
Sensor Path : if/interfaces-state/interface/statistics
Sensor Path : dell-base-if-cmn/if/interfaces-state/interface
Group : lag
Sensor Path : dell-base-if-cmn/if/interfaces
Group : system
Sensor Path : system-status/current-status
-- Telemetry Subscription Profiles --
Name : subscription-1
Destination Groups(s) : dest1
Sensor-group Sample-interval
-----------------------------------
bgp 300000
Telemetry
1133