Connectivity Guide

Tasks: 208 total, 2 running, 204 sleeping, 0 stopped, 2 zombie
%Cpu(s): 9.7 us, 3.9 sy, 0.3 ni, 85.8 id, 0.0 wa, 0.0 hi, 0.3 si, 0.0 st
KiB Mem: 3998588 total, 2089416 used, 1909172 free, 143772 buffers
KiB Swap: 399856 total, 0 used, 399856 free. 483276 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
9 root 20 0 0 0 0 S 6.1 0.0 5:22.41 rcuos/1
819 snmp 20 0 52736 6696 4132 S 6.1 0.2 2:44.18 snmpd
30452 admin 20 0 22076 2524 2100 R 6.1 0.1 0:00.02 top
1 root 20 0 112100 5840 3032 S 0.0 0.1 0:12.32 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:25.37 ksoftirqd/0
5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:+
7 root 20 0 0 0 0 R 0.0 0.0 5:15.27 rcu_sched
8 root 20 0 0 0 0 S 0.0 0.0 2:43.64 rcuos/0
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/0
12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/1
13 root rt 0 0 0 0 S 0.0 0.0 0:07.30 migration/0
14 root rt 0 0 0 0 S 0.0 0.0 0:02.18 watchdog/0
15 root rt 0 0 0 0 S 0.0 0.0 0:02.12 watchdog/1
16 root rt 0 0 0 0 S 0.0 0.0 0:04.98 migration/1
17 root 20 0 0 0 0 S 0.0 0.0 0:03.92 ksoftirqd/1
19 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:+
20 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
21 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs
22 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
23 root 20 0 0 0 0 S 0.0 0.0 0:00.41 khungtaskd
24 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 writeback
25 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd
--more--
OS10# show processes node-id 1 pid 1019
top - 09:21:58 up 5 days, 8 min, 2 users, load average: 0.18, 0.30, 0.31
Tasks: 1 total, 0 running, 1 sleeping, 0 stopped, 0 zombie
%Cpu(s): 9.7 us, 3.9 sy, 0.3 ni, 85.8 id, 0.0 wa, 0.0 hi, 0.3 si, 0.0 st
KiB Mem: 3998588 total, 2089040 used, 1909548 free, 143772 buffers
KiB Swap: 399856 total, 0 used, 399856 free. 483276 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1019 root 20 0 1829416 256080 73508 S 6.6 6.4 1212:36 base_nas
OS10#
LED settings
Beacon LEDs identify the location of ports and system status with blinking or solid LEDs.
Change current state of the location LED of the system or interface using the following commands:
location-led system {node-id | node-id/unit-id} {on | off}
location-led interface ethernet {chassis/slot/port[:subport]} {on | off}
Change the state of system location LED
OS10# location-led system 1 on
OS10# location-led system 1 off
Change the state of interface location LED
OS10# location-led interface ethernet 1/1/1 on
OS10# location-led interface ethernet 1/1/1 off
Troubleshoot OS10
1153