Connectivity Guide

• Informational — An informational error occurred but does not impact performance. Monitor an informational alarm until the condition
changes.
Triggered alarms are in one of these states:
• Active — Alarms that are current and not cleared.
• Cleared — Alarms that are resolved and the device has returned to normal operation.
System logging
You can change the system logging default settings using the severity level to control the type of system messages that log. The range of
logging severities are:
• log-emerg — System is unstable.
• log-alert — Immediate action needed.
• log-crit — Critical conditions.
• log-err — Error conditions.
• log-warning — Warning conditions.
• log-notice — Normal but signicant conditions, the default.
• log-info — Informational messages.
• log-debug — Debug messages.
• Enter the minimum severity level for logging to the console in CONFIGURATION mode.
logging console severity
• Enter the minimum severity level for logging to the system log le in CONFIGURATION mode.
logging log-file severity
• Enter the minimum severity level for logging to terminal lines in CONFIGURATION mode.
logging monitor severity
• Enter which server to use for syslog messages with the hostname or IP address in CONFIGURATION mode.
logging server {hostname/ip-address severity}
Disable system logging
You can use the no version of any logging command to disable system logging.
• Disable console logging and reset the minimum logging severity to the default in CONFIGURATION mode.
no logging console severity
• Disable log-le logging and reset the minimum logging severity to the default in CONFIGURATION mode.
no logging log-file severity
• Disable monitor logging and reset the minimum logging severity to the default in CONFIGURATION mode.
no logging monitor severity
• Disable server logging and reset the minimum logging severity to the default in CONFIGURATION mode.
no logging server severity
• Re-enable any logging command in CONFIGURATION mode.
no logging enable
Enable server logging for log notice
OS10(config)# logging server dell.com severity log-notice
Troubleshoot OS10
1185