Connectivity Guide

Command Mode EXEC
Usage Information None
Example
OS10# clear logging log-file
Proceed to clear the log file [confirm yes/no(default)]:
Supported Releases 10.2.0E or later
logging console
Disables, enables, or congures the minimum severity level for logging to the console.
Syntax
logging console {disable | enable | severity}
Parameters severity — Set the minimum logging severity level:
• log-emerg — Set to unusable.
• log-alert — Set to immediate action is needed.
• log-crit — Set to critical conditions.
• log-err — Set to error conditions.
• log-warning — Set to warning conditions.
• log-notice — Set to normal but signicant conditions, the default.
• log-info — Set to informational messages.
• log-debug — Set to debug messages.
Default Log-notice
Command Mode CONFIGURATION
Usage Information
To set the severity to the default level, use the no logging console severity command. The default
severity level is log-notice.
Example
OS10(config)# logging console disable
Example (Enable)
OS10(config)# logging console enable
Example (Severity)
OS10(config)# logging console severity log-warning
Supported Releases 10.2.0E or later
logging enable
Enables system logging.
Syntax
logging enable
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage Information The no version of this command disables all logging.
Troubleshoot OS10 1193