Connectivity Guide

Supported Releases 10.2.0E or later
show logging
Displays system logging messages by log le, process-names, or summary.
Syntax
show logging {log-file [process-name | line-numbers] | process-names}
Parameters
• process-name — (Optional) Enter the process-name to use as a lter in syslog messages.
• line-numbers — (Optional) Enter the number of lines to include in the logging messages, from 1 to 65535.
Default None
Command Mode EXEC
Usage Information The output from this command is the /var/log/eventlog le.
Example (Log File)
OS10# show logging log-file process-name dn_qos
Example (Process-
Names)
OS10# show logging process-names
dn_pas_svc
dn_system_mgmt_
dn_env_tmpctl
dn_pm
dn_eth_drv
dn_etl
dn_eqa
dn_alm
dn_eqm
dn_issu
dn_swupgrade
dn_ifm
dn_ppm
dn_l2_services
dn_dot1x
dn_l3_core_serv
dn_policy
dn_qos
dn_switch_res_m
dn_ospfv3
dn_lacp
dn_i3
dn_supportassis
--More--
Supported Releases 10.2.0E or later
show trace
Displays trace messages.
Syntax
show trace [number-lines]
Parameters number-lines — (Optional) Enter the number of lines to include in log messages, from 1 to 65535.
Default Enabled
Command Mode EXEC
Usage Information The output from this command is the /var/log/syslog le.
1196 Troubleshoot OS10