Connectivity Guide

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
-* Dell EMC Network Operating System (OS10) *-
-* *-
-* Copyright (c) 1999-2017 by Dell Inc. All Rights Reserved. *-
-* *-
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
This product is protected by U.S. and international copyright and
intellectual property laws. Dell EMC and the Dell EMC logo are
trademarks of Dell Inc. in the United States and/or other
jurisdictions. All other marks and names mentioned herein may be
trademarks of their respective companies.
linuxadmin@OS10:~$
To log in to OS10 and access the command-line interface, enter su — admin at the Linux shell prompt, then admin as the password.
linuxadmin@OS10:~$ su - admin
Password: admin
OS10#
Frequently asked questions
This section contains answers to frequently asked questions for ONIE-enabled devices.
• Installation contains information about how to enter ONIE: Install mode after a reboot, nd information about your specic switch, how
to log into the OS10 shell, and so on.
• Hardware contains information about how to view default console settings, how to view hardware alarms and events, how to view LED
status, and so on.
• Conguration contains information about how to enter CONFIGURATION mode, how to modify the candidate conguration, and so on.
• Security contains information about how to add users, troubleshoot RADIUS, how to view current DHCP information, and so on.
• Layer 2 contains information about how to congure routing information including 802.1X, LACP, LLDP, MAC, and so on.
• Layer 3 contains information about how to troubleshoot BCP, ECMP, OSPF, and so on.
• System management contains information about how to view current interface conguration information, how to view a list of all
system devices, how to view the software version, and so on.
• Quality of service contains information about quality of service including classication and marking, congestion management, policing
and shaping, and so on.
• Monitoring contains information about how to view alarms, events, logs, and so on.
Installation
How do I congure a default management route?
Although the default management route was congured during installation, you can use the route add default gw command from
the Linux shell to congure the default management IP address for routing. SupportAssist requires the default management route is
congured to work properly, as well as DNS congured and a route to a proxy server. For more information, see
Congure SupportAssist
and proxy-server.
How do I log into the OS10 shell as the system administration?
Use linuxadmin as the username and password to enter OS10 at root level.
1198
Troubleshoot OS10